Light and heat Wattage help

Onlyoneworks

New Member
Joined
Dec 17, 2023
Messages
6
Location (City and/or State)
London uk
Hello I’m looking for advice regarding light and heat emitter wattage for a monkfield 48 x 24 x 24 viv for a almost 1 year old (hatch date 1/1/23 )sulcata, he/she was rescued from a pet shop, not by me) what I’m currently using is a 15 watt 12% tube light and a 50 watt heat emitter, it what I have as emergency replacements. substrate is coco coir. He/she (bubsy) is very active, eating and drinking, any other advice is welcome but Please be kind, and thank you for your time
 

Attachments

  • IMG_4303.jpeg
    IMG_4303.jpeg
    690.3 KB · Views: 3

wellington

Well-Known Member
Moderator
10 Year Member!
Tortoise Club
Joined
Sep 6, 2011
Messages
49,907
Location (City and/or State)
Chicago, Illinois, USA
Temps need to never go below 80F. A incandescent flood bulb is needed for basking, 65 watt is usually enough. The ceramic heat emitter is usually a 100watt. The tube fluorescent for uvb is good.
 

Tom

The Dog Trainer
10 Year Member!
Platinum Tortoise Club
Joined
Jan 9, 2010
Messages
63,483
Location (City and/or State)
Southern California
Hello I’m looking for advice regarding light and heat emitter wattage for a monkfield 48 x 24 x 24 viv for a almost 1 year old (hatch date 1/1/23 )sulcata, he/she was rescued from a pet shop, not by me) what I’m currently using is a 15 watt 12% tube light and a 50 watt heat emitter, it what I have as emergency replacements. substrate is coco coir. He/she (bubsy) is very active, eating and drinking, any other advice is welcome but Please be kind, and thank you for your time
Here is a breakdown of the four heating and lighting essentials:
  1. Basking bulb. I use 65 watt incandescent floods from the hardware store. Some people will need bigger, or smaller wattage bulbs. Let your thermometer be your guide. I run them on a timer for about 12 hours and adjust the height to get the correct basking temp under them. I also like to use a flat rock of some sort directly under the bulb. You need to check the temp with a thermometer directly under the bulb and get it to around 95-100F (36-37C).
  2. Ambient heat maintenance. I use ceramic heating elements or radiant heat panels set on thermostats to maintain ambient above 80 degrees day and night for tropical species. In most cases you'd only need day heat for a temperate species like Testudo or DT, as long as your house stays above 60F (15-16C) at night. Some people in colder climates or with larger enclosures will need multiple CHEs or RHPs to spread out enough heat.
  3. Ambient light. I use LEDs for this purpose. Something in the 5000-6500K color range will look the best. Most bulbs at the store are in the 2500K range and they look yellowish. Strip or screw-in LED bulb types are both fine.
  4. UV. If you can get your tortoise outside for an hour 2 or 3 times a week, you won't need indoor UV. In colder climates, get one of the newer HO type fluorescent tubes. Which type will depend on mounting height. 5.0 bulbs make almost no UV. I like the 12% HO bulbs from Arcadia. You need a meter to check this: https://www.solarmeter.com/model65.html A good UV bulb only needs to run for 2-3 hours mid day. You need the basking bulb and the ambient lighting to be on at least 12 hours a day.
 

New Posts

Top