Uv basking lamp

Aussiedeb

New Member
Joined
Mar 15, 2021
Messages
5
Location (City and/or State)
Watford
Hi everyone,
My spur thighed tortoise came with a d3 80w arcadia basking lamp and as it was flickering earlier, (its fine now as I switched off and on again) do I replace with the same or are there better alternatives and possibly cheaper alternatives for her? She's 7yrs, thank you
 

Tom

The Dog Trainer
10 Year Member!
Platinum Tortoise Club
Joined
Jan 9, 2010
Messages
54,125
Location (City and/or State)
Southern California
Hi everyone,
My spur thighed tortoise came with a d3 80w arcadia basking lamp and as it was flickering earlier, (its fine now as I switched off and on again) do I replace with the same or are there better alternatives and possibly cheaper alternatives for her? She's 7yrs, thank you
There are four elements to heating and lighting:
  1. Basking bulb. I use 65 watt incandescent floods from the hardware store. Some people will need bigger, or smaller wattage bulbs. Let your thermometer be your guide. I run them on a timer for about 12 hours and adjust the height to get the correct basking temp under them. I also like to use a flat rock of some sort directly under the bulb. You need to check the temp with a thermometer directly under the bulb and get it to around 95-100F (36-37C).
  2. Ambient heat maintenance. I use ceramic heating elements or radiant heat panels set on thermostats to maintain ambient above 80 degrees day and night for tropical species. You'd only need day heat for a temperate species like Testudo or DT, as long as your house stays above 60F (15-16C) at night.
  3. Light. I use LEDs for this purpose. Something in the 5000-6500K color range will look the best. Most bulbs at the store are in the 2500K range and they look yellowish. Strip or screw-in bulb types are both fine.
  4. UV. If you can get your tortoise outside for an hour 2 or 3 times a week, you won't need indoor UV. In the UK, get one of the newer HO type fluorescent tubes. Which type will depend on mounting height. 5.0 bulbs make almost no UV. I like the 12%. You need a meter to check this: https://www.solarmeter.com/model65.html
Here is the correct care info for your species. Lots of bad info out there.
 

Aussiedeb

New Member
Joined
Mar 15, 2021
Messages
5
Location (City and/or State)
Watford
There are four elements to heating and lighting:
  1. Basking bulb. I use 65 watt incandescent floods from the hardware store. Some people will need bigger, or smaller wattage bulbs. Let your thermometer be your guide. I run them on a timer for about 12 hours and adjust the height to get the correct basking temp under them. I also like to use a flat rock of some sort directly under the bulb. You need to check the temp with a thermometer directly under the bulb and get it to around 95-100F (36-37C).
  2. Ambient heat maintenance. I use ceramic heating elements or radiant heat panels set on thermostats to maintain ambient above 80 degrees day and night for tropical species. You'd only need day heat for a temperate species like Testudo or DT, as long as your house stays above 60F (15-16C) at night.
  3. Light. I use LEDs for this purpose. Something in the 5000-6500K color range will look the best. Most bulbs at the store are in the 2500K range and they look yellowish. Strip or screw-in bulb types are both fine.
  4. UV. If you can get your tortoise outside for an hour 2 or 3 times a week, you won't need indoor UV. In the UK, get one of the newer HO type fluorescent tubes. Which type will depend on mounting height. 5.0 bulbs make almost no UV. I like the 12%. You need a meter to check this: https://www.solarmeter.com/model65.html
Here is the correct care info for your species. Lots of bad info out there.
Hi Tom,

Thanks so much for this info! Really appreciate it
 
TortoiseSupply.com

New Posts

Top