JHat
Member
So this is a concept of an enclosure i'm thinking of building.
Overall measurements are 12'x12' with 28" above grade and 6" below grade, the top opens from 2 sides (hinged in the middle) theres a 2' wide swing door on one side.
The pipe running along the top will most likely be pvc (flex hose where it exits the enclosure so it doesn't interfere wit the lid doors) with tee branches and misters every 3' (6 total).
The pond is 4' in diameter.
I've made the "tortoise" representation for scale they are drawn in at 14" long.
There will be hides and plants of course but i haven't drawn them in yet.
Overall measurements are 12'x12' with 28" above grade and 6" below grade, the top opens from 2 sides (hinged in the middle) theres a 2' wide swing door on one side.
The pipe running along the top will most likely be pvc (flex hose where it exits the enclosure so it doesn't interfere wit the lid doors) with tee branches and misters every 3' (6 total).
The pond is 4' in diameter.
I've made the "tortoise" representation for scale they are drawn in at 14" long.
There will be hides and plants of course but i haven't drawn them in yet.