COLD DARK ROOM

Yvonne G

Old Timer
TFO Admin
10 Year Member!
Platinum Tortoise Club
Joined
Jan 23, 2008
Messages
93,449
Location (City and/or State)
Clovis, CA
If you can get me a pic of those labels on the tank it would help. Where is the air valve located? If that tank is a pressure tank there should never be water coming out of the air valve. There should be a rubber bladder inside sectioning the tank so one side holds air and the other side holds water. If the bladder gets a hole in it water enters the air side. The electric box in front. You notice a wire in conduit running over to the little gray box. That is your limit switch. There are different limit ranges but I will use a 30/50. Meaning when the pressure in the tank gets down to 30 psi the pump turns on. When the pressure builds up to 50 the pump turns off. With a pump going on and off either your pressure tank is bad or your limit switch. If you can get pics of the labels I should be able to find out what system you have.
It's not really a 'brand' per se. The guy who digs the well puts together the submersible pump, tank and all the electrical parts piece meal. But tomorrow I'll go out and see if there are any labels.
 

Yvonne G

Old Timer
TFO Admin
10 Year Member!
Platinum Tortoise Club
Joined
Jan 23, 2008
Messages
93,449
Location (City and/or State)
Clovis, CA
Ach! And 'tis vurra hot out there, lads and lassies!! According to the map it's only 86F right now, but it sure feels hotter than that! I had to come in and cool off. And I really doubt I'll be going back out. Oh well. . . all the work that needs doing will still be there tomorrow.
 

Maro2Bear

Well-Known Member
5 Year Member
Joined
May 29, 2014
Messages
14,716
Location (City and/or State)
Glenn Dale, Maryland, USA
Ach! And 'tis vurra hot out there, lads and lassies!! According to the map it's only 86F right now, but it sure feels hotter than that! I had to come in and cool off. And I really doubt I'll be going back out. Oh well. . . all the work that needs doing will still be there tomorrow.

Same here - hot, sticky and yucky. We had a quick thundershower yesterday, but it was like adding water onto boiling rocks in a Finnish sauna. Just made it steamy!

I have good intentions to move some wood around, but the moment I pick the wheelbarrow up to get going, I retreat inside to the cool basement and a/c.
 

Lyn W

Well-Known Member
5 Year Member
Joined
Jul 22, 2014
Messages
23,537
Location (City and/or State)
UK
Send me a pic. I refer to myself as Jack of all trades master of none. I have always fixed repairs around the house. Built my first house at 21 and never stopped learning since. It was harder in the 80"s. You had to figure things out yourself or pry some info from a tradesman that didn't want to give his knowledge up for free. No Google back then.
Thanks Ray, I can't take pics at the moment on my cheapy phone, and it's pretty inaccessible because of the way the tanks have been fitted, but you reminded me of the time that Ed once fixed my car for me via the CDR!!!
 

Lyn W

Well-Known Member
5 Year Member
Joined
Jul 22, 2014
Messages
23,537
Location (City and/or State)
UK
Thank you. Today is Opo's birthday so there will be some pics of the celebration.
Happy Birthday Opo!
I hope Daddy made you a lovely cake like this
images
 

Lyn W

Well-Known Member
5 Year Member
Joined
Jul 22, 2014
Messages
23,537
Location (City and/or State)
UK

Lyn W

Well-Known Member
5 Year Member
Joined
Jul 22, 2014
Messages
23,537
Location (City and/or State)
UK
Last edited:

Lyn W

Well-Known Member
5 Year Member
Joined
Jul 22, 2014
Messages
23,537
Location (City and/or State)
UK
I was thinking of trying my car insurance first. They paid to have my house redone for my needs. 70000 dollars worth. I am just a little apprehensive but all they can say is no.
It's hydrotherapy so they should at least consider it. Maybe your doc will give you a letter supporting your request!!
 
Top