John84
Member
- Joined
- Apr 16, 2015
- Messages
- 73
Hi every one! I just built a new enclosure for Theo the Sulcata Tort. I was wondering if I could get some feedback on balancing the temps. I have two ceramic heat emitters; one is 250 watts and the other is 60. They are both set up on the same zilla thermostat. It's set to 83F, but the thermostat next to it says 77. Is there an issue with the zilla thermostat? Also on the far left it's about 80 then it gets hotter towards the bulb (I'm assuming it gets over 100 under the 250 emitter but haven't tested it since the red seams ok) and then "83" in the middle and 78 all the way to the right. Is this ok?
Last edited by a moderator: