Height of closed chamber/heat lamps

JoshSloane

Member
Joined
Sep 3, 2015
Messages
60
Ok I am working on my closed chamber for my new sulcata. The only lamps I can find in my area that have a ring on it that can attach to a hook are the deep dome variety. I am planning on having two lamps hanging from the top of the enclosure, one for the flood basking light, and one for the CHE. Also going to install a t5 HO 10.0 UVB on the roof as well. I will have a dimmer for the flood light and a thermostat for the CHE, so I wont need to alter the height much to get to the correct temps, pending the height of the enclosure is within usable limits. I was thinking 2 feet high would work well. Thoughts?
 

johnandjade

Well-Known Member
5 Year Member
Joined
Oct 26, 2014
Messages
15,918
Location (City and/or State)
scotland
hi there, im in the middle of a build for a herrmans. its 7x3ft and 2.5 high. also planning similar lighting, our current mvb is lower than this in a partially covered table so figure it'll be ok with room to adjust either way?
 

New Posts

Top