- Joined
- Feb 21, 2010
- Messages
- 8,803
wellington said:On, I see, your one of those supervisors that thinks they do all the work . Kidding of course. So, whatcha building?
wellington said:On, I see, your one of those supervisors that thinks they do all the work . Kidding of course. So, whatcha building?
wellington said:My laundry room is a stacked washer and dryer
N2TORTS said:Not bad kiddo not bad at all.....and MAMMA taught me .." Always treat a WOMEN with a HAMMER with RESPECT! ,,,,,, although two things ...is that foam going to be exposed to the elements on the outter sides? Also ... where your little door way is ... you should have brought the "uprights" actually known as "trimmers and king studs" ... all the way to the top of the " top plate" this will help stabalize the door opening as well as provide more nailing area for your foam/wall material .
wellington said:Gosh darn, nope. I gots me a washer an dryer an hung up the wash board and bucket. I be moving up.
Team Gomberg said:N2TORTS said:Not bad kiddo not bad at all.....and MAMMA taught me .." Always treat a WOMEN with a HAMMER with RESPECT! ,,,,,, although two things ...is that foam going to be exposed to the elements on the outter sides? Also ... where your little door way is ... you should have brought the "uprights" actually known as "trimmers and king studs" ... all the way to the top of the " top plate" this will help stabalize the door opening as well as provide more nailing area for your foam/wall material .
um..let me see if I get it.
The rigid insulation is covered with plywood on both sides. An outer wall and an inner wall. I'm just not done yet. So, the answer is "no it wont be exposed". Is that what you were asking?
The "trimmers and king studs" ? does that mean my 2x2 should also connect to the top of the frame? If so, I have more and can fix that if I need to. Again, all sides have a plywood wall on the outside and the inside.
I really did my best to understand Tom's directions and copy it. I'll use the mini oil filled heat radiator, too.